Mitsubishi Electric F920GOT-K Hardware Manual page 432

GOT-F900 SERIES (CONNECTION)
[Change method] Change the connection type of the already created data as follows.
Connection of SYSMAC C Series PLC (Manufactured by Omron) 15
Operation
Click "Got Setup" in the tree of the system environment menu.
e)Set the following.
Port : RS-422
RS-232C
Type : LINK
Station No. : 00 to 31
GOT Station No. : −
In the case of F943 Handy GOT
Without regard to the port setting (RS-422 or RS-232C), the
COM0 side of the RS-232C is fixed for PLC connection.
a)Open GT Designer2.
b)Click the [Project]-[Open] button.
c)Open (read) the screen data to be changed.
d)On the menu, select "Common"-"System Environment".
- For the contents of setting, refer to c) of [Creation] above.
- For selection of the RS-422 or the RS-232C on the SYSMAC C
Series PLCs, refer to e) of [Creation] above.
Display (screen name)
The "Select Project"
dialog box appears.
The "System
Environment" dialog box
appears.
15-20