Mitsubishi Electric F920GOT-K Hardware Manual page 276

GOT-F900 SERIES (CONNECTION)
2) GT Designer2
[Creation]
Operation
a)Open GT Designer2.
b)Click the [NEW] button.
The dialog box shown below is displayed.
If it is not displayed, click "System Environment" in the tree
displayed in the project work space, then click "System settings"
in the tree.
c)Set the following.
GOT type: F940WGOT (480 × 234)
F94*GOT (320 × 240)
F93*GOT (240 × 80)
F920GOT (128 × 64)
PLC type:MELSEC-QnA, Q (QnA CPU, QnA computer link)
MELSEC-A (A computer link)
Selection of "GOT type"
GOT type
F940WGOT(480×234)<WIDE>
F94*GOT(320×240)
F93*GOT(240×80)
F920GOT(128×64)
Click [OK].
Connection of MELSEC-QnA Series PLC 10
Model name (name)
F940WGOT
F940GOT
Handy GOT
F930GOT
F930GOT-K
F920GOT-K
Display (screen name)
The "Select Project"
dialog box appears.
The "System
Environment" dialog box
appears.
10-16