Installation - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
5.16.4

Installation

The connector conversion box can be installed directly on the panel face, or installed with a metal fixture
offered as accessory.
Direct installation on the panel face
1) Processing the panel face
Make an installation slot of the dimensions shown on the right
on the panel face.
2) Installing the connector conversion box on the panel face
Put the connector conversion box on the back side of the panel face, then fix it with M3 screws
(prepared by the user) from the front side.
In mounting holes of the connector conversion box, thread of M3 × 7mm (0.28") in depth
reprocessed.
While considering the plate thickness of the panel, prepare proper four mounting screws (M3).
Make sure that no interfering objects are present within 90mm (3.55") from the rear face so that the
connector of the PLC cable can be easily connected.
M 3 s c r e w ´ 4 p i e c e s
( p r e p a r e d b y u s e r )
Installation with a metal fixture
1) Attaching a metal fixture
Attach a metal fixture offered as an accessory to the connector conversion box.
M o u n t i n g s c r e w s
( a c c e s s o r i e s )
M 3 s c r e w
U n i t : m m ( i n c h e s )
C o n n e c t o r c o n v e r s i o n b o x
M e t a l f i x t u r e
( a c c e s s o r y )
2 p i e c e s
´
1 0
( 0 . 4 0 " )
D o n o t u s e t h e m o u n t i n g h o l e s o n t h e r i g h t s i d e .
Installation and Wiring of Handy GOT 5
( 0 . 3 2 " )
D r i l l 4 - 3 . 5
T h r e a d d e p t h : 7 m m ( 0 . 2 8 " )
. r o n t s i d e
9 0 m m
o f p a n e l
( 3 . 5 5 " )
3 0 ( 1 . 1 9 " ) 8
8
P a n e l c u t
U n i t : m m
( i n c h e s )
5-59
1
2
3
4
5
6
7
8
9
10