Configuration For Cpu Direct Connection (Rs-232C) - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
17.2.2

Configuration for CPU Direct Connection (RS-232C)

Connect the MP900/CP9200SH machine controller to the MEMOBUS port built in the CPU unit or the
COM port of the MEMOBUS unit and the RS-232C communication port of the GOT.
The GOT-F900 and the machine controller can be connected on the 1:1 basis.
1) F930GOT/F930GOT--K/F940GOT/F940WGOT
GOT-F900
F930GOT
F940GOT
a) Machine controller
CP-217IF
MP920
MP930
- Applicable machine controller products in the column a) are CPU or MEMOBUS units equipped with built-in
RS-232C interface.
*1 In the CP-217IF, the COM1 is the 9-pin D-Sub port and the COM2 is the 25-pin D-Sub port. (The COM3 is
an RS-422 port.)
Connection of Machine Controller CP9200SH (PLC Manufactured by Yaskawa Electric) 17
b) RS-232C cable
*1
9-pin D-Sub
(A) F9GT-HCAB-""M
25-pin D-Sub
(B) Prepared by the user
9-pin D-Sub
(C) F9GT-HCAB1-""M
MEMOBUS unit
CP-217IF
b) RS-232C cable
a) Machine controller
CP9200SH,MP920
a) Machine controller
MP920,MP930
Remarks
MEMOBUS unit
CPU unit
17-4