Mitsubishi Electric F920GOT-K Hardware Manual page 431

GOT-F900 SERIES (CONNECTION)
2) GT Designer2
[Creation] a)Open GT Designer2.
b)Click the [NEW] button.
c)Set the following.
d)Setting the port (RS-422 or RS-232C) of the GOT-F900
Connection of SYSMAC C Series PLC (Manufactured by Omron) 15
Operation
The dialog box shown below is displayed.
If it is not displayed, click "System Environment" in the tree
displayed in the project work space, then click "System settings"
in the tree.
GOT type: F940WGOT (480 × 234) <WIDE>
F94*GOT (320 × 240)
F93*GOT (240 × 80)
F920GOT (128 × 64)
PLC type: OMRON SYSMAC
Selection of "GOT type"
GOT type
F940WGOT(480×234)<WIDE>
F94*GOT(320×240)
F93*GOT(240×80)
F920GOT(128×64)
Click [OK].
Click "Auxiliary Setting" in the tree of the system environment
menu.
Click the check box of "Use Serial Port, Setup, Language, Menu
Key" to give a check mark ($).
Model name (name)
F940WGOT
F940GOT
Handy GOT
F930GOT
F930GOT-K
F920GOT-K
Display (screen name)
The "Select Project"
dialog box appears.
The "System
Environment" dialog box
appears.
The "Setting" dialog box
appears.
15-19
11
12
13
14
15
16
17
18
19
20