Command List And Compatible Version Of Got-F900 - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
14.5.2

Command List and Compatible Version of GOT-F900

The table below explains commands used to transfer data between the GOT-F900 and the
microcomputer.
Command list
Command Command name
'0' 30
H
Batch read
command
'A' 41
H
'1' 31
H
Batch write
command
'B' 42
H
'3' 33
H
Bit-oriented write
command
'D' 44
H
'4' 34
H
Fill command
'E' 45
H
Compatible version of GOT-F900
Batch read command
Batch write command
Bit-oriented write command
Fill command
Consecutively reads data by as much as the specified number of
points from the specified device.
To the command above, specification with the station number is added.
<Available in versions in which connection of two or more GOT units is
enabled.>
Consecutively writes data by as much as the specified number of
points to the specified device.
To the command above, specification with the station number is added.
<Available in versions in which connection of two or more GOT units is
enabled.>
Write specified bit device in a byte unit according to a pattern
Write specified data to all the devices between specified data and
specified data
F920GOT-K
F930GOT
24V type
Ver1.20 Ver1.00
Ver1.20 Ver1.00
Ver1.20 Ver4.50
Ver1.20 Ver4.50
Connection of Microcomputer 14
Description
F930GOT-K F940GOT
Ver4.60 Ver1.00
Ver4.60 Ver1.00
Ver4.60 Ver6.50
Ver4.60 Ver6.50
Reference
14.6.1
14.6.2
14.6.3
14.6.4
F940WGOT Handy GOT
Ver1.00 Ver1.00
Ver1.00 Ver1.00
Ver1.50 Ver6.50
Ver1.50 Ver6.50
14-14