Caution When Setting Screen Creation Software - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
11.5.4

Caution when setting screen creation software

QCPU of function version -B or later (except Q00JCPU, Q00CPU, or Q01CPU) is compatible with the
multiple PLC system with 4 GOT units maximum.
When two or more QCPU are attached to the main unit, the configuration is called a multiple PLC
system, and monitoring of other CPU (number specified) from the CPU connected with the GOT-F900 is
enabled.
According to the PLC type specified in the screen creation software, the CPU which can be monitored is
determined as follows
1) In one unit CPU configuration
In the screen creation software, select MELSEC-QnA, A for PLC type.
PLC type in screen creation
software and GOT
MELSEC-QnA, Q
MELSEC-Q (Multi)
2) In multiple PLC system
In the screen creation software, select MELSEC-Q (Multi) for PLC type.
PLC type in screen creation
software and GOT
MELSEC-QnA, Q
MELSEC-Q (Multi)
CPU connected with
GOT-F900
$
−
CPU connected with
GOT-F900
$
$
PLC number of CPU
1 2 3 4
Other CPU
Control PLC
QCPU 4 units
Connection of MELSEC-Q Series PLC 11
Other CPU Serial communication unit
−
Only control PLC monitored
−
Other CPU Serial communication unit
−
Only control PLC monitored
$
GOT-F900
11
12
13
14
−
15
$
16
17
18
19
20
11-15