Mitsubishi Electric F920GOT-K Hardware Manual page 581

GOT-F900 SERIES (CONNECTION)
Connected PLC: AnA
Object
Number (Numerical Display),
Bar Graph: 16 bits
Number (Numerical Display),
Bar Graph: 32 bits
Indicator (Lamp)
Change Screen (Display screen
changeover) using device
conditions
- The current value and indirectly specified value set by the Number (Numerical Display) and Bar Graph
is counted.
The device conditions used in the Change screen (Display screen changeover) setting is counted.
- When performing the screen display or screen overlap, make sure the total number of devices on
displayed screens does not exceed the total in the previous formula (34).
4) Restriction in PLC current consumption
The FX-2PIF current consumption is shown in the following table.The power is supplied from the 5V
DC power supply of the PLC.
For the 5V DC power capacity, refer to the PLC manual.
Item
Line voltage
Current consumption
Number of
objects used
Number (Numerical Display),
2
Bar Graph: 16 bits
Number (Numerical Display),
4
Bar Graph: 32 bits
Indicator (Lamp)
1 Device settings: other than "Input X"
Device settings: "Input X"
Change Screen (Display screen changeover)
1 Device settings: other than "Input X"
Device settings: "Input X"
5V DC (supplied from the PLC)
310mA (when a personal computer PC9801 or PC/AT compatible model is used.)
340mA (when FX-20P is used.)
180mA (when A7PHP , A7HGP , A6GPP , A6PHP , A6HGP and MELSEC-LM is used.)
Connected PLC: AnN, A2C, A1S, A0J2H
Object
Specification
Appendix 23
21
Number of
objects used
22
2
4
23
1
2
1
2
23-15