Setting Of Connected Equipment For Got - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
20.7

Setting of Connected Equipment for GOT

The SIMATIC S7-200/300/400 Series PLC connection parameters can be set using the GOT-F900
Series and the screen creation software (GT Designer 2, GT Designer or DU/WIN).
1) GOT-F900 Series
When the main menu screen change operation is disabled.
a)While pressing and holding the upper left corner of the screen,
turn on the power. Keep holding the upper left corner for about
25 seconds more.
Then, press "END" at the upper right corner.
b)Press "PLC TYPE".
c) Set the following.
PLC TYPE: SIEMENS S7-200
CONNECTION:CPU PORT (RS-232C)
(S7-200)
DST STATION # : 1 to 31
GOT STATION # : 0 to 31
(S7-300)
DST STATION # (STATION #): 02 to 31
GOT STATION # (−)
When the main menu screen change operation is enabled.
a)Press the upper left corner of the screen. (The position to be
pressed can be changed in the GOT and the screen creation
software.)
b)Press "OTHER MODE" on the menu.
c) Press "SET-UP MODE" on the menu.
d)Press "PLC TYPE".
e)Set the following.
PLC TYPE: SIEMENS S7-200
CONNECTION:CPU PORT (RS-232C)
(S7-200)
DST STATION # : 1 to 31
GOT STATION # : 0 to 31
(S7-300)
DST STATION # (STATION #): 02 to 31
GOT STATION # (−)
- When the screen data is transferred to the GOT-F900, the old data including the PLC type, connection type,
and station number are overwritten.
Connection of SIMATIC S7-200/300/400 Series PLC (Manufactured by Siemens AG) 20
Operation
SIEMENS S7-300
("00" and "01" are treated as "02".)
: −
Operation
SIEMENS S7-300
("00" and "01" are treated as "02".)
: −
Display (screen name)
The "LANGUAGE" screen appears.
The "SET-UP MODE" screen appears.
The "PLC TYPE" screen appears.
Display (screen name)
The "SELECT MODE" screen appears.
The "OTHER MODE" screen appears.
The "SET-UP MODE" screen appears.
The "PLC TYPE" screen appears.
20-12