Sequence Program Transfer (Two-Port Interface Function Built) - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
6.2.2

Sequence Program Transfer (two-port interface function built)

Sequence program transfer and monitoring can be executed through the two-port interface function built
in the GOT-F900.
FXCPU direct connection
ACPU direct connection
QnACPU direct connection
QCPU direct connection
Q computer link connection
QnA computer link connection
The F920GOT-K can be used only in the FXCPU direct connection.
1) Applicable PLC
Transferred data type
Sequence program
transfer
2) Data transfer cable
a) RS-232C cable
FX-232CAB-1
- The screen data and sequence program can be transferred using a same cable.
GOT-F900
GOT-F900
Two-port interface built
F920GOT-K FXCPU direct connection (RS-422 connection only)
FXCPU direct connection
Other than
QnACPU direct connection
F920GOT-K
Q computer link connection
Personal computer
PC/AT compatible machine
Connection of Peripheral Equipment 6
a) RS-232C cable
Handy
GOT
Applicable PLC
ACPU direct connection
QCPU direct connection
QnA computer link connection
RS-232C port shape of personal computer
9-pin D-Sub, male
Personal computer
GX Developer
FXGP/WIN
6-4