Bar Code Reader Communication Setting; Transmission Specifications And Communication Format - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
22.3

Bar Code Reader Communication Setting

The GOT can be connected to a bar code reader which satisfies the transmission specifications and the
communication format shown below.
22.3.1

Transmission Specifications and Communication Format

Set the transmission specifications and the communication format of the bar code reader as shown in
the table below. For the setting method, refer to the manual of the bar code reader.
1) Transmission Specifications
Transmission speed
Data format
- The transmission specifications and the communication format are fixed on the GOT-F900 side, and
cannot be changed. Align the settings in the bar code reader with the settings in the GOT-F900.
2) Communication Format
Not
provided
Header
Item
Data bit
Parity bit
Stop bit
. . . . .
Data Data
ASCII character code
Set value
9600 bps
8 bits
Provided (even)
1 bit
CR(ODH)
End code
Connection of Bar Code Reader 22
Remarks
22-3
21
22
23