System Configuration; Configuration For Link Unit Connection (Rs-422) - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
16.2

System Configuration

The FLEX-PC N Series PLC can be connected to the GOT via RS-422 or RS-232C using a link unit.
This section explains the cables and options required to connect the FLEX-PC N Series PLC.
16.2.1

Configuration for Link Unit Connection (RS-422)

The GOT-F900 and the link unit can be connected on the 1:1 basis.
1) F930GOT/F930GOT-K/F940GOT/F940WGOT
GOT-F900
F930GOT
F940GOT
a) FLEX-PC N Series
NB-RS1-AC
NJ-RS4
NS-RS1
- Applicable FLEX-PC N Series products in the column a) are link units equipped with built-in RS-422
interface.
2) F940 Handy GOT
GOT-F900
Handy GOT
(RS-422)
Use the RS-422
port on the rear
face.
a) FLEX-PC N Series
NB-RS1-AC
NJ-RS4
NS-RS1
- Applicable FLEX-PC N Series products in the column a) are link units equipped with built-in RS-422
interface.
Connection of FLEX-PC N Series PLC (Manufactured by Fuji Electric) 16
b) RS-422 cable
b) RS-422 cable
Terminal
Prepared by the user
block
b) RS-422 cable
(A)
(D)
Total extension distance: 11.5m (37' 9") or less
b) RS-422 cable
(A) F9GT-HCAB-""M
(B) F9GT-HCNB
Terminal
block
(C) Prepared by the user.
(D) F9GT-HCAB1-""M
a) FLEX-PC N Series
link unit
(C)
(B)
To power supply
and operation
switches
Remarks
a) FLEX-PC N
Series link unit
To RS-422
To RS-422,
power supply
and operation
switches
Remarks
16-2