Mitsubishi Electric F920GOT-K Hardware Manual page 513

GOT-F900 SERIES (CONNECTION)
e)Set the following.
[Change method] Change the connection type of the already created data as follows.
a)Open GT Designer2.
b)Click the [Project]-[Open] button.
c)Open (read) the screen data to be changed.
d)On the menu, select "Common"-"System Environment".
Connection of SLC500/MicroLogix Series PLC (Manufactured by Allen-Bradley) 19
Operation
Click "Got Setup" in the tree of the system environment menu.
Port : RS-232C
Type : CPU
Station No. : 00 to 31
GOT Station No. : −
In the case of F943 Handy GOT
Without regard to the port setting (RS-422 or RS-232C), the
COM0 side of the RS-232C is fixed for PLC connection.
- For the contents of setting, refer to c) of [Creation] above.
- For selection of the RS-232C on the SLC500 and MicroLogix
Series PLCs, refer to e) of [Creation] above.
Display (screen name)
The "Select Project"
dialog box appears.
The "System
Environment" dialog box
appears.
19-13
11
12
13
14
15
16
17
18
19
20