Mitsubishi Electric F920GOT-K Hardware Manual page 328

GOT-F900 SERIES (CONNECTION)
2) GT Designer2
[Creation]
Operation
a)Open GT Designer2.
b)Click the [NEW] button.
The dialog box shown below is displayed.
If it is not displayed, click "System Environment" in the tree
displayed in the project work space, then click "System settings"
in the tree.
c)Set the following.
GOT type: F940WGOT (480 × 234) <WIDE>
F94*GOT (320 × 240)
F93*GOT (240 × 80)
PLC type: FX(2N)-10GM/20GM
Selection of "GOT type"
GOT type
F940WGOT(480×234)<WIDE>
F94*GOT(320×240)
F93*GOT(240×80)
Click [OK].
d)Setting the port (RS-422) of the GOT-F900
Click "Auxiliary Setting" in the tree of the system environment
menu.
Click the check box of "Use Serial Port, Setup, Language, Menu
Key" to give a check mark ($).
Click "Got setup" in the tree of the system environment menu.
Connection of FX Series Positioning Unit (FX(2N)-10/20GM) 12
Model name (name)
F940WGOT
F940GOT
Handy GOT
F930GOT
F930GOT-K
Display (screen name)
The "Select Project"
dialog box appears.
The "System
Environment" dialog box
appears.
The "Auxiliary Settings"
dialog box appears.
12-6