System Condition; Connection Configuration; Configuration For Bar Code Reader Connection - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
22.1

System Condition

When connecting the bar code reader, check the COM port designation, the OS version of the GOT-
F900, and applicable versions of the screen creation software.
While the screen data is transferred from a personal computer or a printer is used in another mode in
the GOT, the communication with a bar code reader is disabled because the RS-232C port is already
occupied.
Compatibility when connecting the bar code reader
GOT-F900
Series
F920GOT-K
F930GOT
F930GOT-K
F940GOT
F940WGOT
F940 Handy GOT
F943 Handy GOT
*1 The RS-232C port for the Handy type GOT is provided inside the rear cover. As a result, environmental
protection is lost when using this port and such a connection is not practical.
22.2

Connection Configuration

The bar code reader can be connected to the RS-232C port of the GOT-F900. This section explains the
cable and the option required for connection.
22.2.1

Configuration for Bar Code Reader Connection

GOT-F900
F930GOT
F940GOT
Check the shape at end of cable of bar code reader used.
COM port
RS-422 RS-232C
− −
− $
− $
− $
− $
− −
*1
− −
*1
b) RS-232C cable
To RS-232C connector
of GOT-F900
a) Bar code reader
Version of screen creation software
OS version
of GOT-F900
GT Designer2 GT Designer
− −
2.00 SW1-C
4.60 SW1-C
2.00 SW1-C
1.00 SW1-C
2.00 SW1-C
2.00 SW1-C
a) Bar code reader
Bar code reader
Prepared by the user
Connection of Bar Code Reader 22
DU/WIN
− −
SW1-H 2.30
SW5-26C 2.70
SW1-H 2.20
SW5-F 2.50
SW1-H 2.20
SW1-H 2.20
b) RS-232C cable
22-2