Mitsubishi Electric F920GOT-K Hardware Manual page 433

GOT-F900 SERIES (CONNECTION)
3) GT Designer
[Creation] a)Open GT Designer (Screen Designer).
b)Click the [New] button.
c)Set the following.
d)Set link connection (RS-422/RS-232C) of the GOT-F900.
Connection of SYSMAC C Series PLC (Manufactured by Omron) 15
Operation
GOT type: F940WGOT (480 × 234) <WIDE>
F94*GOT (320 × 240)
F93*GOT (240 × 80)
PLC type: OMRON SYSMAC
Selection of "GOT type"
GOT type
F940WGOT(480×234)<WIDE>
F94*GOT(320×240)
F93*GOT(240×80)
Click [OK].
This setting is enabled in the SW4D5C-GOTR-PACKE version A
or later.
Click the check box of "Use Serial Port, Setup, Language, Menu
Key" to give a check mark ($).
Click the "Setup" tab.
Display (screen name)
The "Select Project"
dialog box appears.
The "GOT/PLC Type"
dialog box appears.
Model name
F940WGOT
F940GOT
Handy GOT
F930GOT-K
F930GOT
11
12
13
14
15
16
17
18
19
20
15-21