System Configuration; Configuration For Direct Connection (Rs-232C) - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
11.2

System Configuration

The Q Series PLC can be connected to the GOT through a serial communication unit connection (RS-
422 or RS-232C) or directly via RS-232C. This section explains the cables and options required in such
a system.
11.2.1

Configuration for Direct Connection (RS-232C)

Connect the GOT-F900 to the programming port of the Q Series PLC.
1) F920GOT-K/F930GOT/F930GOT-K/F940GOT/F940WGOT
GOT-F900
F930GOT
F940GOT
F920GOT-K (5V type)
a) Q Series PLC
QCPU direct connection
(6-pin MINI DIN)
F920GOT-K (24V type)/F930GOT/F930GOT-K/F940GOT/F940WGOT
a) Q Series PLC
QCPU direct connection
(6-pin MINI DIN)
a) Q Series PLC
QCPU direct connection
b) RS-232C cable
Not enabled with F920GOT-K
Connection of two or more GOT units
. . .
b) RS-232C cable
Prepared by the user.
b) RS-232C cable
QC30R2
Connection of MELSEC-Q Series PLC 11
Remarks
Make sure the total cable extension
distance is 3m (9' 10") or less.
Remarks
11
12
13
14
15
16
17
18
19
20
11-3