Mitsubishi Electric F920GOT-K Hardware Manual page 98

GOT-F900 SERIES (CONNECTION)
3) GT Designer
[Setting]
[LED setting]
[Switch setting]
Function key
Caution on setting of "Lamp (External)"
1. The contents of "Lamp (External)" you have set are not displayed on the screen.
2. The setting of the "Lamp (External)" check box is valid only in the F920GOT-K, F930GOT-K and
Handy GOT. Never set it in any other series.
3. Set only one lamp for all screens of the created screen data.
Installation and Wiring of F920GOT-K/F930GOT(-K)/F940(W)GOT 4
Operation
a)It is supposed that the GT Designer has started up and the screen
data to be set is read.
b)Open a user screen to be set.
Any screen is available as far as it has been already created.
Select and display the base screen (B-1) in this example.
c)Select "Draw"-"Animation Display"-"Lamp" on the menu.
d)On the "Basic" tab, click "Lamp (External)" to display the check
$
mark ( ), click the [Device] button, input a bit device to be
assigned, then click [OK].
Refer to Caution on setting of "Lamp (External)" described later.
e)On the menu, select "Common"-"Operation Panel".
f) Click "Available Operation Panel" to display the check mark (
Refer to "Function key setting" described later.
Display (screen name)
The "Lamp" dialog box
appears.
"Edit Operation Panel"
dialog box appears.
$
).
4-28