Setting Of Connected Equipment For Got - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
5.14

Setting of Connected Equipment for GOT

The setting in the screen creation software is required to turn on and off the LED of the operation
switches and the grip switch from connected equipment. This section describes the setting method.
1) GOT-F900 Series
When the main menu screen change operation is disabled.
a)While pressing and holding the upper left corner of the screen,
turn on the power. Keep holding the upper left corner for about
25 seconds more. Then, press "END" at the upper right corner.
b)Press "GRIP SWITCH".
<When the OS version is 6.00 or later>
Press "HANDY GOT SETTING".
c) Set the following.
"USE" (valid) or "DON'T USE"(invalid)
When the main menu screen change operation is enabled.
a)Press the upper left corner of the screen. (The position to be
pressed can be changed in the GOT and the screen creation
software.)
b)Press "OTHER MODE" on the menu.
c) Press "SET-UP MODE" on the menu.
d)Press "GRIP SWITCH".
<When the OS version is 6.00 or later>
Press "HANDY GOT SETTING".
e)Set the following."USE" (valid) or "DON'T USE"(invalid)
<When the OS version is 6.00 or later>
The grip switch operation can be set. Press an item to be
changed.
HANDY GOT SETTING
GRIP SWITCH:
PUSH BUTTON WRITE: DOES NOT WRITE
SWITCH OFF ACTION:
TOUCH SWITCH OFF
LED ACTION:
CONCURRENTLY WITH GRIP SWITCH
When using RH model
HANDY GOT SETTING
GRIP SWITCH:
PUSH BUTTON WRITE: DOES NOT WRITE
SWITCH OFF ACTION:
TOUCH SWITCH OFF
LED ACTION:
CONCURRENTLY WITH GRIP SWITCH
<When the OS version is earlier than 6.00>
Only the grip switch operation can be set.
- When the screen data is transferred from the screen creation software to the GOT-F900, the
contents above are replaced with the contents set in the screen creation software. Have in mind
that the setting about the grip switch is overwritten.
Operation
Operation
END
When using the grip
switch, press the screen to
USE
display "USE".
These items are added in
the OS version 6.00.
END
USE
These settings are invalid.
Installation and Wiring of Handy GOT 5
Display (screen name)
The "LANGUAGE" screen appears.
The "SET-UP MODE" screen appears.
The "GRIP SWITCH" screen appears.
Display (screen name)
The "SELECT MODE" screen appears.
The "OTHER MODE" screen appears.
The "SET-UP MODE" screen appears.
The "GRIP SWITCH" screen appears.
1
2
3
4
5
6
7
8
9
10
5-49