Mitsubishi Electric F920GOT-K Hardware Manual page 442

GOT-F900 SERIES (CONNECTION)
2) Software
Screen Communication with the screen
creation creation software and screen data
software cannot be transferred.
Connection of SYSMAC C Series PLC (Manufactured by Omron) 15
Contents of trouble Check points and countermeasures
A SYSMAC C Series PLC, bar code reader or printer is
connected.
• Causes
The RS-232C connector to which the personal computer is
connected is set to be used for another piece of equipment.
• Countermeasures
In the GOT-F900, select by hand "SELECT MODE"-"OTHER
MODE"-"DATA TRANSFER".
Or set a bar code reader to invalid and a printer to "DON'T
USE".
Something is wrong with the cable between the GOT-F900
and the personal computer.
• Causes
The connected cable is not proper. Or cable connection is
not correct.
• Countermeasures
Check the cable.
15-30