Accounting Start-Fail - H3C MSR Series Command Reference Manual

undo accounting sslvpn
In FIPS mode:
accounting sslvpn { local | radius-scheme radius-scheme-name [ local ] }
undo accounting sslvpn
Default
The default accounting methods of the ISP domain are used for SSL VPN users.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
local: Performs local accounting.
none: Does not perform accounting.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive
string of 1 to 32 characters.
Usage guidelines
You can specify one primary accounting method and multiple backup accounting methods.
When the primary method is invalid, the device attempts to use the backup methods in sequence.
For example, the accounting sslvpn radius-scheme radius-scheme-name local none command
specifies a primary RADIUS accounting method and two backup methods (local accounting and no
accounting). The device performs RADIUS accounting by default and performs local accounting
when the RADIUS server is invalid. The device does not perform accounting when both of the
previous methods are invalid.
Examples
# In ISP domain test, perform local accounting for SSL VPN users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting sslvpn local
# In ISP domain test, perform RADIUS accounting for SSL VPN users based on scheme rd and use
local accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting sslvpn radius-scheme rd local
Related commands
accounting default
local-user
radius scheme

accounting start-fail

Use accounting start-fail to configure access control for users that encounter accounting-start
failures.
Use undo accounting start-fail to restore the default.
14