Table of Contents
Advertisement
Model 4200-SCS Reference Manual
HP 4980 LCR Meter Properties and Connections tab
When you select HP 4980 LCR Meter in the Configuration Navigator, its Properties
& Connections tab displays in the Workspace. See
NOTE
Figure 7-23
HP 4980 LCR Meter Properties & Connections tab
This Properties & Connections tab provides access to the HP 4980 instrument properties, and
also provides useful switch-matrix connection information.
Instrument Properties area
The Instrument Properties area of this Properties & Connections tab provides access to the
following HP 4980 instrument properties:
NOTE
Matrix Connections area
When a matrix is included in the system configuration, the Matrix Connections area of this
Properties & Connections tab displays the matrix connections that are associated with the
Agilent 4980 measurement terminals.
4200-901-01 Rev. S / May 2017
The Agilent (HP) 4980 is a supported external instrument. Therefore, the Model
4200-SCS provides a user library containing preconfigured data acquisition and
control user modules. Refer to
•
Model
Full vendor name, model number, and instrument description.
•
GPIB Address
Primary GPIB address list. Addresses that are in use are displayed with
asterisks (*) next to them. The minimum address value is 0; the
maximum is 30 (GPIB address 31 is reserved as the Model 4200-SCS
controller address). If the selected GPIB address conflicts with the
GPIB address of another instrument in the configuration, a red
exclamation-point symbol (!) is displayed next to the address.
You can programmatically read the GPIB address and other instrument properties
from the system configuration via the LPTLib getinstattr function. Proper
usage of getinstattr allows you to develop user libraries in a configuration-
independent manner. For more information, refer to
(KULT)
in Section 8.
Return to
Figure
Table 7-1
for additional supporting information.
Section Topics
Section 7: Keithley CONfiguration Utility (KCON)
7-23.
Keithley User Library Tool
7-27
Advertisement
Chapters
Table of Contents
