Keithley 4200-SCS Reference Manual page 359

Model 4200-SCS Reference Manual
Figure 6-280
Align To <MatingCursorNumber> cursor example
NOTE
Figure 6-281
Tracking of diamond cursor by square cursor when its Lock To <MatingCursorNumber>
checkbox is checked
10. The <MatingCursorNumber> cursor is cursor 2 if <CursorNumber> is 1, cursor 1 if <CursorNumber> is 2, cursor
4200-901-01 Rev. S / May 2017
After the cursor moves to the minimum point, the Go To MIN checkbox reverts to the
unchecked state, and the cursor may be manually repositioned.
• Align To <MatingCursorNumber>: Aligns the <CursorNumber> cursor to the same X axis
value as the <MatingCursorNumber> cursor.
• Nonrepetitive. After the alignment, 1) the Align To <MatingCursorNumber> checkbox
reverts to the unchecked state, and 2) the cursor may be manually repositioned.
The Align To <MatingCursorNumber> checkbox is disabled—gray—if the graph
does not display the mating cursor when the Visible checkbox for the cursor is not
checked.
• Lock To <MatingCursorNumber>: Locks the position of the <CursorNumber> cursor
relative to the position of its mating cursor—the <MatingCursorNumber> cursor
<CursorNumber> cursor tracks the movement of the mating cursor, and the relative X
distance between the two cursors remains constant. See
4 if <CursorNumber> is 3, and so on.
Return to
Section 6: Keithley Interactive Test Environment (KITE)
10
Align to 1
Section Topics
See Figure 6-280.
Figure 6-281.
10
. The
6-233