Keithley 4200-SCS Reference Manual page 192

Section 6: Keithley Interactive Test Environment (KITE)
Option II. Insert the ITM as-is: If you specifically need a same-named ITM and the rules for
same-named ITM meet your test objectives, insert it without renaming it, as follows:
1. Click Overwrite in the Test Already Exists message box. A new instance of the same-
named ITM appears under Test Sequence Table in the Device Plan window.
Figure 6-65
that was selected in
to this second-instance of "vds-id" in the Project Plan.
Figure 6-65
Second instance of a same-named ITM added to the Test Sequence Table
2. If, under Test Sequence Table, an ITM is not at the preferred position in the sequence, do
this:
a. Select the ITM to be moved.
b. Use the Move Up button or the Move Down button to reposition ITM.
Figure 6-66
Move Up, so that their UID numbers are in numerical sequence.
Figure 6-66
Relocating an ITM
6-66
shows the "vds-id" ITM added to the Test Sequence Table, at the location
Figure 6-61. Note that the next sequential UID number, 2, is assigned
shows the results of reversing the order of the two "vds-id" ITMs, using
Return to Section Topics
Model 4200-SCS Reference Manual
4200-901-01 Rev. S / May 2017