Opening An Existing Project Plan - Keithley 4200-SCS Reference Manual

Section 6: Keithley Interactive Test Environment (KITE)

Opening an existing Project Plan

To open an existing Project Plan, do the following:
1. In the File menu, select Open Project. The Open KITE Project File window appears,
displaying a file tree for the Project Plan that was last opened in KITE. See
Figure 6-77
Example of Open KITE Project File window as it initially opens
2. In the File Name edit box of the Open KITE Project File window, enter the
<ProjectName>.kpr Project Plan name using one of the following methods:
• Method I: Type <ProjectDirectoryPath><ProjectName>.kpr directly in the File
• Method II: Browse for the file name as follows:
a. Do one of the following:
Figure 6-78
Next-file-level-up button
The Open KITE Project File window should now display the folders for all Project Plan files
in the default or otherwise specified Project Plan directory. See
Figure 6-79
Example display of all Project Plans in specified directory
2. For example, the C:\S4200\kiuser\Projects factory-default directory or another directory that was specified as the
default using KCON, such as C:\S4200\YourName\Projects.
6-72
Name edit box.
• If the Project Plan is in the default user directory,
button, which is illustrated below.
• If the Project Plan is not in the default user directory, in the Look In combo box,
browse for and insert the correct Project Plan directory (typically
Return to Section Topics
Model 4200-SCS Reference Manual
Figure
2
then click the next-file-level-up
<Path>\Projects
Figure 6-79.
4200-901-01 Rev. S / May 2017
6-77.
).