Keithley 4200-SCS Reference Manual page 380

Section 6: Keithley Interactive Test Environment (KITE)
Figure 6-311
Cursor <CursorNumber> window example
NOTE
3. In the Cursor <CursorNumber> window, click the Properties button. The Line Fits window
opens.
4. In the Line Fits window, under Type, select the desired line fit type.
For illustration purposes,
default (Linear).
Figure 6-312
Regression line-fit selection
5. In the Line Fits window, click OK.
6-254
2. In the Cursor <CursorNumber> window, check the Fit #1 or Fit #2 checkbox,
whichever is displayed.
Fit #1 is always associated with cursors 1 and 2. Fit #2 is always associated with
cursors 3 and 4.
You can alternatively use the Cursors window to specify that an existing cursor(s) is to be
a line fit cursor(s). Open the Cursors window
>
sequence: Tools Graph Settings menu
appropriate.
Figure 6-312
Return to
(Figure 6-310
>
Cursors. Then check #1 On or #2 On, as
shows Regression being selected in place of the
Section Topics
Model 4200-SCS Reference Manual
above) using the following
4200-901-01 Rev. S / May 2017