Section 6: Keithley Interactive Test Environment (KITE)
Viewing data using the Graph tab
The Graph tab allows you to create and export graphs of the test and test-analysis results, which
in some cases may be displayed in real time as the test executes. The Graph tab provides for
flexible plot-data selection, formatting, annotation, and numerical coordinate display (using
precision cursors). This subsection covers the following Graph tab topics:
•
Opening a Graph tab
•
Accessing the Graph tab windows
•
Defining the data to be graphed
•
Defining the axis properties of the graph
•
Defining the plot properties of the graph: colors, line patterns, symbols, line widths
•
Numerically displaying plot coordinates using cursors
•
Viewing plot coordinates and data series properties using the pointing device (mouse)
•
Visually reading plot coordinates using cross hairs
•
Performing on-graph line fits
•
Numerically displaying extracted parameters and other data variables
•
Displaying test conditions
•
Adding a title, legend, or comment to the graph
•
Changing area properties of the graph
•
Changing the size of a graph
•
Changing the position of a graph
•
Identically configuring the graphs resulting from one test executed at multiple sites
•
Saving a graph
•
Resetting certain graph properties to KITE defaults
•
Appending curves from multiple runs on a single graph
Opening a Graph tab
Open a Graph tab as follows:
1.
Open the ITM or UTM window for the selected test by double-clicking on the test in the
Project Navigator.
2.
When the ITM or UTM window opens, click on the displayed Graph tab. The Graph tab
opens.
Figure 6-242
which the data was generated are displayed in the upper left corner. However, the axes are
labeled and scaled generically, because no project data has yet been assigned to the axes.
6-204
displays an unconfigured graph for the "vds-id" ITM. The time and date at
Return to
Section Topics
Model 4200-SCS Reference Manual
4200-901-01 Rev. S / May 2017