Keithley 4200-SCS Reference Manual page 403

Model 4200-SCS Reference Manual
Changing graph foreground and background colors.
Select the colors of graph foreground (the plot area) and background (outside the plot area) using
the Foreground and Background combo boxes in the Graph Area window (the available colors
are identical to the available colors for all other Graph tab components). Then click Apply. The
new colors are applied to the graph.
foreground and background colors.
Figure 6-348
Illustration of foreground and background colors
Creating a monochrome graph
CAUTION
If you check the Monochrome checkbox and then click Apply, the entire graph displays in black
and white. The foreground and background color selection is overridden, and the foreground and
background colors are both white. The line colors change to black and white, and the line patterns
are automatically selected.
Hiding the displayed date and time
To hide the displayed date and time, do the following:
1.
2.
To restore the displayed date and time, do the following:
1.
2.
4200-901-01 Rev. S / May 2017
Unchecking the Monochrome checkbox and then clicking Apply does not
restore the pre-monochrome colors.
In the Graph Area window, check the Remove Time/Date checkbox by clicking it.
Click Apply. The date and time display disappears from the graph.
In the Graph Area window, uncheck the Remove Time/Date checkbox by clicking it.
Click Apply. The date and time display reappears on the graph.
Return to Section Topics
Section 6: Keithley Interactive Test Environment (KITE)
Figure 6-348 shows the vds-id graph with some contrasting
6-277