Specifying Which Test Library Directories Are To Be Available To Projects - Keithley 4200-SCS Reference Manual

Model 4200-SCS Reference Manual
2.
Figure 6-404
Directories tab displaying a default test library

Specifying which test library directories are to be available to projects

When choosing project ITMs and UTMs through a Device Plan window, you can normally choose
these only from the test library that resides in the default user directory.
previously submitted tests to a library other than the default test library (as directed in
tests to a
allows you to add (and delete) other test library selections to all Device Plan windows.
Adding a test library directory to the selections in a Device Plan window
Add a test-library selection as follows:
1.
2.
3.
Figure 6-405
"New" toolbar button
14. For example, the C:\S4200\kiuser\Tests factory-default directory or another directory that was specified as the
4200-901-01 Rev. S / May 2017
In the KITE Options window, click on the Directories tab label. See
library), then you may desire to choose tests from multiple libraries. Therefore, KITE
Open the Directories tab as described above under
this section.
In the Directories tab, in the Show directories for combo box, select Test Libraries. The
Directories edit box displays the test library directories from which you can presently insert
tests into a project plan.
In the Directories area of the Directories tab, click the New toolbar button, as shown
Figure 6-405, or press the INSERT keyboard key.
default using KCON, such as C:\S4200\YourName\Tests.
Return to
Section 6: Keithley Interactive Test Environment (KITE)
Section Topics
Figure 6-404.
14
However, if you
Customizing directory options later in
Submitting
6-341