Keithley 4200-SCS Reference Manual page 944

Section 11: Pulse Source-Measure Concepts
GateVPU
DrainVPUHigh
DrainVPULow
DrainV_DC_X_Size
DrainI_DC_X_Size
GateV_DC_X_Size
GateI_DC_X_Size
DrainV_Pulse_X_Size
DrainI_Pulse_X_Size
GateV_Pulse_X_Size
GateI_Pulse_X_Size
Outputs:
DrainV_DC_X
DrainV_Pulse_X
DrainI_DC_X
DrainI_Pulse_X
GateV_DC_X
GateV_Pulse_X
GateI_DC_X
GateI_Pulse_X
Vd_Id_Single_DC_QPulseIV
Module Return Type: int
Number of Parameters: 28
Arguments:
11-76
(char*) String representing the ID for the PG2 connected to the DUT Gate.
(char*) String representing the top VPU on the Model 4205-PCU for the DUT
Drain. This is the card on the right (or the card with the lower ID number),
when facing the back of the system.
(char*) String representing the bottom VPU on the Model 4205-PCU for the
DUT Drain. This is the card on the left (or the card with the higher ID number),
when facing the back of the system.
(int) Sizes of the output arrays. All arrays should be the same
size, and need to be large enough to hold all sweep points.
(double) Array of programmed drain voltage values.
(double) Array of measured drain currents.
(double) Array of measured gate voltages.
(double) Array of measured gate currents.
Vgs,double,Input,2,,
VdStart,double,Input,0,,
VdStop,double,Input,4,,
VdStep,double,Input,.05,,
GateRange,int,Input,1,,
GateCompliance,double,Input,.1,,
DrainRange,int,Input,1,,
DrainCompliance,double,Input,.1,,
NPLC,double,Input,.01,,
SweepDelay,double,Input,0,,
MaxIg,double,Input,1,,
MaxId,double,Input,1,,
MaxPowerGate,double,Input,200,,
MaxPowerDrain,double,Input,200,,
GateSMU,char *,Input,"SMU1",,
DrainSMU,char *,Input,"SMU2",,
GateVPU,char *,Input,"VPU1",,
Return to Section Topics
Model 4200-SCS Reference Manual
4200-901-01 Rev. S / May 2017