Scope Error Codes - Keithley 4200-SCS Reference Manual

Model 4200-SCS Reference Manual
Table 9-11 (continued)
KXCI command strings for scope card
Read Waveform
KXCI command: :SCOPE:READ:WAVEFORM:TIMESTAMPS?
Purpose: Returns an array of timestamps that correspond to the waveform data.
Also see: Other
ZTEC function: SCP2:
Example: Returns timestamps:
Store Reference Waveform
KXCI command: :SCOPE:STORE:REF:WAVEFORM referenceChannel, source
Purpose: Stores a waveform from one of the sources in a reference waveform channel.
Parameters: referenceChannel
Also see: Other
ZTEC function: SCP2:
Example: Stores a waveform from Input Channel 1 into Reference Channel 1:

Scope error codes

The following scope error codes apply to both the 4200-SCP2HR and 4200-SCP2:
{0, -100, "ERROR!! -100: Command error"},
{0, -101, "ERROR!! -101: Invalid character"},
{0, -102, "ERROR!! -102: Syntax error"},
{0, -103, "ERROR!! -103: Invalid separator"},
{0, -104, "ERROR!! -104: Data type error"},
{0, -105, "ERROR!! -105: Get not allowed"},
{0, -108, "ERROR!! -108: Parameter not allowed"},
{0, -109, "ERROR!! -109: Missing parameter"},
{0, -110, "ERROR!! -110: Command header error"},
{0, -111, "ERROR!! -111: Header separator error"},
{0, -112, "ERROR!! -112: Mnemonic too long"},
{0, -113, "ERROR!! -113: Undefined header"},
{0, -114, "ERROR!! -114: Header suffix out-of-range"},
{0, -118, "ERROR!! -118: Query not allowed"},
{0, -120, "ERROR!! -120: Numeric data error"},
{0, -121, "ERROR!! -121: Invalid char in number"},
4200-901-01 Rev. S / May 2017
(returns timestamps)
Waveform commands,
zt450_read_waveform
SCP2HR: zt410_read_waveform
:SCOPE:READ:WAVEFORM:TIMESTAMPS?
Return to
=
=
=
=
Selects the reference channel to store the waveform in.
source = 0 Input Channel 1
= 1 Input Channel 2
= 2 Calc Channel 1
= 3 Calc Channel 2
Selects the source of the waveform to be read.
Waveform commands,
zt450_store_reference_waveform
SCP2HR: zt410_store_reference_waveform
:SCOPE:STORE:REF:WAVEFORM 0, 4
Return to
Return to
Section 9: Keithley External Control Interface (KXCI)
Measurement commands
Scope commands list
4 Reference Channel 1
5 Reference Channel 2
6 Reference Channel 3
7 Reference Channel 4
= 4 Reference Channel 1
= 5 Reference Channel 2
= 6 Reference Channel 3
= 7 Reference Channel 4
Measurement commands
Scope commands list
Section Topics 9-93