Building The User Library To Include The New User Module; Finding Build Errors; Checking The User Module - Keithley 4200-SCS Reference Manual

Semiconductor characterization system

Hide thumbs Also See for 4200-SCS:

Table of Contents

Model 4200-SCS Reference Manual

Building the user library to include the new user module

After you have successfully compiled the user module, build the user library (or rebuild the user

library) to include the module.

To build the user library:

Find build errors using the information in the error message.

To check the user module by creating and executing a UTM in KITE:

4200-901-01 Rev. S / May 2017

Keep the Build tab area open.

In the Options menu, click Build. The following occurs:

a. The user library builds. All of the user modules in the presently open user library, and

any libraries on which the presently open user module depends, are linked together. A

DLL is then created that is accessible using UTMs in KITE.

b. The KULT Build Library message box (similar to the KULT Compile message box)

indicates the build progress and, if linker problems are encountered, displays error

messages (when you build the TwoTonesTwice user module, you should see no

c. When the KULT Build Library message box closes (or, if there are error messages when

you click Ok), the Build tab area displays either of the following:

If the compilation was successful, the following message appears: No Errors/

Warnings Reported, Library Build was Successful.

If the compilation was unsuccessful, any error messages that were displayed in the

KULT Build Library message dialog box also display in the Build tab area (in red).

Create a simple KITE project to check user modules, as follows:

a. Start KITE by double-clicking the KITE icon on the desktop or by clicking KITE in the

start menu (Start

b. In the KITE File menu, click New Project. The KITE - Define New Project dialog box

c. In the KITE - Define New Project dialog box:

In the Project Name text box, enter a project name. A logical choice is

UserModCheck. For this tutorial, enter UserModCheck.

Under Project Plan Initialization Steps, click On (see

Section Topics

Section 8: Keithley User Library Tool (KULT)

Table of Contents