Keithley 4200-SCS Reference Manual page 381

Model 4200-SCS Reference Manual
6.
Figure 6-313
Result of checking the Fit #<CursorNumber> checkbox
Before checking Fit# <CursorNumber> checkbox
7.
4200-901-01 Rev. S / May 2017
In the still open Cursor <CursorNumber> window, click OK.
The following new items appear on the graph:
• An additional mating cursor, if a mating cursor was not already displayed when you
started this procedure (cursor 2 if <CursorNumber> is 1; cursor1 if <CursorNumber> is
2, cursor 4 if <CursorNumber> is 3, and cursor 3 if <CursorNumber> is 4).
• Coordinates for both cursors.
• A fit line.
• Fit parameters corresponding to the line fit.
Figure 6-313 illustrates the transition.
If the cursors are not at the desired locations, then adjust them using the methods described
under Positioning cursors on the graph using drag-and-drop
graph using special options.
Return to Section Topics
Section 6: Keithley Interactive Test Environment (KITE)
After checking Fit# <CursorNumber>
checkbox, clicking Properties, and
selecting the Regression fit Type
See Figure 6-314.
Added cursor
or Positioning cursors on the
6-255