Keithley 4200-SCS Reference Manual page 552

Section 8: Keithley User Library Tool (KULT)
Figure 8-35
Enter New Module dialog box
c. In the Enter New Module dialog box, enter the name VSweepBeep instead of the
NOTE
KULT creates a copy of the user module under the new name and displays a message
indicating the need to rebuild the user library (see
Figure 8-36
Library build message box
You may skip the rebuild for now. Continue with the next step.
4. Open the new VSweepBeep user module.
a. Click File
b. Select VSweepBeep.c from the list box that appears. The KULT dialog box displays the
5. Continue with
NOTE
8-36
default name, and click Ok.
Each user module must have a unique name, regardless of the user library in which
it resides. That is, in the presently active user library folder, there can only be one
user module of a given name in its entire collection of libraries.
More than one collection of user libraries can be maintained and accessed, each
collection residing in a separate usrlib. However, only one usrlib can be active at a
time. For more information, refer to the
page 8-39.
>
Open Module.
VSweepBeep user module.
Calling independent user module from VSweepBeep user
You can also create a copy of the presently open user module in the same user
library as follows:
1. Enter a new name in the User Module text box.
2. Click Apply. Before using the user module, you must save and compile
it, and then rebuild the user library.
Return to
Reference Manual, Managing user libraries,
Figure
Section Topics
Model 4200-SCS Reference Manual
8-36).
module.
4200-901-01 Rev. S / May 2017