Keithley 4200-SCS Reference Manual page 468

Section 6: Keithley Interactive Test Environment (KITE)
A combination edit box/directory picker box now appears below the last displayed directory.
See
Figure 6-406
Combination edit box/combo box for entering test library directory
4. In the combination edit box/directory picker box that is displayed in the Directories area,
enter the path and directory name of the test library to be added. Use one of the following
methods:
• Method I: Type in the path of the test library directory to be added. For example, see
Figure 6-407
Personal test directory name and path typed into the displayed edit box/combo box
• Method II: Browse for the test library directory, as follows:
a. Click the button at the right side of the edit box/directory picker box that is displayed in
Figure 6-408
KITE - Select Directory window
b. In the KITE - Select Directory window, browse for the directory to be added. If you need
c.
6-342
Figure 6-406.
Combination edit box/combo box
Figure 6-407.
the Directories area. A KITE - Select Directory window appears. For example, see
Figure 6-408.
to map a network drive for a new directory, click the Network button and map the drive
using the Map Network Drive window that appears.
Figure 6-409 shows the selection of a personal test library directory called
c:\S4200\Joel\Tests using the browse method.
Return to Section Topics
Model 4200-SCS Reference Manual
4200-901-01 Rev. S / May 2017