Specifying Environment Preferences - Keithley 4200-SCS Reference Manual

Section 6: Keithley Interactive Test Environment (KITE)
b. Double-click on the <ProjectName> folder (the folder that contains the project to be
Figure 6-397
Select Default KITE Project window: Desired project file tree
c. Click on the <ProjectName>.kpr file name (in our example, ivcvswitch.kpr). The file
3. In the Select Default KITE Project, click Open. The Default Project area of the KITE
Options window now displays the new default project.
Figure 6-398
area.
Figure 6-398
Illustration of new default directory
4. In the Environment Preferences area of the Workspace tab, check the Load default
project checkbox to instruct KITE to load the specified default project every time a user
starts KITE. This action simultaneously checks and denies access to the three
Environmental Preferences checkboxes that are located below the Load default project
checkbox.
5. At the bottom of the KITE Options window, click OK. The default project will now open every
time that you start KITE.

Specifying environment preferences

Each Environment Preferences checkbox in the Workspace tab is summarized below:
• Gradient caption: When Gradient caption is checked, the gradient caption bar is
displayed above the KITE window as follows:
Figure 6-399
Gradient caption bar
6-338
opened). The Select Default KITE Project window displays the file tree for the project to
be opened.
For illustration, ivcvswitch was selected as the default project, resulting in the file tree
shown in Figure 6-397.
name is entered in the File name edit box.
shows the ivcvswitch name and file path displayed in the Default Project
Return to Section Topics
Model 4200-SCS Reference Manual
4200-901-01 Rev. S / May 2017