Keithley 4200-SCS Reference Manual page 463

Model 4200-SCS Reference Manual
Figure 6-394
Select Default KITE Project window
2.
Figure 6-395
Next-file-level-up button
Figure 6-396
Select Default KITE Project window example showing all projects in directory
13. For example, the C:\S4200\kiuser\Projects factory default directory or another directory that was specified as the
4200-901-01 Rev. S / May 2017
In the File Name edit box of the Select Default KITE Project window, enter the
<ProjectName>.kpr project name using one of the following methods:
• Method I: Type <ProjectDirectoryPath><ProjectName>.kpr directly in the File Name
edit box.
• Method II: Browse for the file name as follows:
a. Do one of the following:
• If the project is in the default user directory,
illustrated below.
• If the project is not in the default user directory, in the Look In combo box, browse for
and insert the correct project directory (typically <Path>\Projects).
The Select Default KITE Project window should now display the folders for all project
files in the default or otherwise specified project directory. See
default using KCON, such as C:\S4200\YourName\Projects.
Return to
Section 6: Keithley Interactive Test Environment (KITE)
Section Topics
13
then click the next-file-level-up button,
Figure 6-396.
6-337