Table of Contents
Advertisement
Section 6: Keithley Interactive Test Environment (KITE)
The active Project Plan is displayed in the KITE Project Navigator, which is the window displayed
at the left of the KITE main screen. See
•
Displays the Project Plan structure/hierarchy.
•
Allows point-and-click opening of configuration screens and menus for each of the
individual Project Plan components.
•
Allows point-and-click selection of where Subsite Plans, Device Plans, and tests are to be
added to or deleted from the Project Plan.
•
Allows point-and-click control of the Project Navigator Checkboxes. Plans and tests are
enabled to run by inserting check marks in the checkboxes. Removing check marks
disables plans and tests (see NOTE in
•
Allows point-and-click selection of individual Subsite Plans, Device Plans, or tests,
exclusive of other parts of the Project Plan.
The combo box labeled Site directly above the Project Navigator is the Site Navigator. The Site
Navigator does the following:
•
Determines the site that newly acquired data will be assigned to when the Run button is
clicked.
•
Allows a site to be selected manually by using the spin buttons (the arrows at the right side
of the Site Navigator edit box).
Figure 6-18
example Project Plan has the same structure as illustrated in
Plan name is displayed above the Site Navigator in the Test/Plan Indicator box.
Figure 6-18
Example Project Plan, as displayed in the Project Navigator
Lower-level plans within this hierarchy are discussed in
6-40
shows the Project Navigator and Site Navigator for a Project Plan called example. The
Return to
Section Topics
Figure
6-18. The Project Navigator provides the following:
Figure
6-17).
Figure
Test/Plan Indicator box
Site Navigator
Project Navigator
Project structure later in this
Model 4200-SCS Reference Manual
6-17. Note that the Project
section.
4200-901-01 Rev. S / May 2017
Advertisement
Chapters
Table of Contents
