Keithley 4200-SCS Reference Manual page 23

Model 4200-SCS Reference Manual
Pulse source and measure tests can be provided by the 4225-PMU Ultra-fast IV pulse-measure
card. Tests requiring pulse source, but no corresponding pulse measurement, can use the
4220-PGU pulse-only card.One typical configuration with pulse source-measure capability would
be a 4200-SCS system that consists of four SMUs, two 4225-PMUs and four 4225-RPMs. This
system would then have four SMUs and four Pulse IV channels (pulse source and measure), with
the RPMs allowing for switching between pulse and SMU test resources.The primary 4200-SCS
components and typical supported external components are illustrated in
Figure 1-1
Model 4200-SCS summary
Test Module
(ITM) Library
Interactive Test
Environment)
Keyboard
& Pointing
Device
Flat Panel
Monitor
User
Optional
External
Interface
Monitor
4200-901-01 Rev. S / May 2017
Interactive User Test
Module
(UTM) Library
KITE
KULT
(Keithley
(Keithley User
Library Tool)
Software
Software
Computer
Video Parallel
USB
Interface Interface
Printer
Pointing Device
Flash Drive
Printer
Return to
Model 4200-SCS
KTE-Interactive
Software
KXCI
KCON
(Keithley
(Keithley
External Control
CONfiguration
Interface
Management
Software)
Software)
PreAmps
SMUs
PG2s
Pulses
SCP2
CVU
LAN Serial
GPIB
Interface Interface Interface
Network
Other External Control
Section Topics
Section 1: Introduction
Figure 1-1.
KScope
(Keithley Scope
Virtual Front
Panel)
KPulse
(Keithley Pulse
Virtual Front
Panel)
VISA
I/V
I/V
RBTs
C/V
Pulses
External
Pulse
Generator
Switch
Prober
Matrix
Pulses
1-3