Rearranging And Deleting Itms And Utms - Keithley 4200-SCS Reference Manual

Section 6: Keithley Interactive Test Environment (KITE)

Rearranging and deleting ITMs and UTMs

Rearranging ITMs and UTMs
You can rearrange the order of ITMs and UTMs within a Device Plan, as follows:
1. In the Project Navigator, locate the Device Plan that contains the ITMs or UTMs to be
relocated (hereafter, referred to as "tests" if appropriate).
For illustration purposes, the move_me UTM was added to the u_mod Project Plan and
was chosen for relocation. The 4terminal-n-fet Device Plan in subsite_a contains the
move_me UTM. See
Figure 6-99
Device Plan containing a UTM to be moved
2. Double-click the Device Plan that contains the test to be relocated. The corresponding
Device Plan window opens.
For illustration purposes, the 4terminal-n-fet Device Plan was double-clicked, opening the
Device Plan window shown in
Figure 6-100
Device Plan window opened for the move_me UTM to be relocated
6-82
Figure 6-99.
Figure 6-100.
Return to Section Topics
Model 4200-SCS Reference Manual
4200-901-01 Rev. S / May 2017