Adding An Analysis Formula To The Itm Or Utm; Executing An Analysis Formula - Keithley 4200-SCS Reference Manual

Model 4200-SCS Reference Manual
2.
For example, to find the regression line for the plateau in
Figure
Figure 6-363
Creating the regression formula for the data

Adding an analysis formula to the ITM or UTM

To move from the upper Formula box and enter it in the collection of formulas in the lower
Formula box, click the Add button. See example results in
run the ITM or UTM, this action also executes the new formula for the existing data.
Figure 6-364
Added and executed regression formula for the plateau
To enter an edited formula in the upper box, also click the Add button. You are given the option to
replace the same-named formula in the lower box or to rename and add it to the collection of
formulas. Refer also to

Executing an analysis formula

If you specify future project data as arguments of a formula (for example, you create the formula
when you configure the associated ITM or UTM, before running it) the following occurs:
If you specify existing project data as the arguments of a formula, the formula immediately
executes and acts on the existing data when you click the Add button. Thereafter, it executes as
indicated in the bulleted list above.
4200-901-01 Rev. S / May 2017
Enter the right side of the equation at using the function buttons, constant buttons, columns
buttons, and keyboard, as appropriate.
• To insert a function or operator, click a button in the Functions area.
• To replace the format version of an argument in a function (for example, V1) with a
column (vector) or value from the Columns area, select the area in the formula and click
the Columns item.
• To insert a constant from the Constants area, click the button next to the constant.
6-363.
Editing formulas and constants.
• If you compose the formula using exclusively real-time functions, it executes in real time
during each run of a test.
• If you compose a formula containing one or more post test only functions, it executes at the
end of each run of the ITM or UTM.
Return to
Section 6: Keithley Interactive Test Environment (KITE)
Section Topics
Figure 6-361, enter the equation in
Figure 6-364. If you have previously
6-313