Table of Contents
Advertisement
Model 4200-SCS Reference Manual
Figure 6-215
Append worksheet tab illustration
Figure 6-216
Appended graph example
The Append mode may be applied to an entire test sequence (a Device Plan or Subsite Plan) as
well as to a solitary test. Each time the sequence is run, the results of each test in the sequence
are placed in the appropriate data sheet and appended to the appropriate graph.
NOTE
4200-901-01 Rev. S / May 2017
Append worksheet tabs
•
In the Graph tab, the Append data curves for a test append to (layer on top of) the Run-
data curves.
Figure 6-216
For details about graphing the appended data, refer to
on a single
graph.
You cannot Append execute an entire Project Plan; you can Append execute only a
test sequence or individual test.
Return to
Section 6: Keithley Interactive Test Environment (KITE)
shows the results of four Append mode runs.
Four Append curves (two of which overlap)
Data curve
Section Topics
Appending curves from multiple runs
6-169
Advertisement
Chapters
Table of Contents
