Ki 4200 Scope Properties And Connections Tab - Keithley 4200-SCS Reference Manual

Section 7: Keithley CONfiguration Utility (KCON)
Figure 7-18
KI 4205 VPU Properties & Connections tab
This Properties & Connections tab is divided as follows:
• Instrument Properties area
• Matrix Connections area
• Self Test button
These three areas are described below.
Instrument Properties area
The Instrument Properties area provides a variety of useful hardware and software version
information, as well as calibration information.
Matrix Connections area
The Matrix Connections area displays the matrix connections that are associated with the VPU
output terminals, if the following conditions apply:
• A matrix is included in the system configuration.
• The VPU is connected to the matrix.
Self Test button
The Self Test button starts the Self Test utility, which aids in troubleshooting potential VPU
hardware problems. When you run Self Test, the VPU performs several internal performance
checks to determine if it is operating correctly. No external equipment is required. When the Self
Test process finishes, a pass/fail window appears.

KI 4200 SCOPE Properties and Connections tab

When you select KI 4200 SCOPE in the Configuration Navigator, its Properties & Connections
tab displays in the Workspace. See
7-22
Provides useful hardware and software version information.
Provides switch-matrix connection information.
Accesses the built-in VPU Self Test diagnostic utility.
Figure 7-19.
Return to Section Topics
Model 4200-SCS Reference Manual
4200-901-01 Rev. S / May 2017