Keithley 4200-SCS Reference Manual page 733

Model 4200-SCS Reference Manual
Table 8-25 (continued)
Code status or error titles
4200-901-01 Rev. S / May 2017
Code Status or error titles
-271 Floating point log of zero or negative number.
-272 Floating point square root of negative number.
-273 Floating point pwr of negative number.
-280 Label #%d not defined.
-281 Label #%d redefined.
-282 Invalid label ID #%d.
-301 PCI ID read back on send error, slot.
-455 Protocol version mismatch.
-510 No command byte available (read) or SRQ not asserted.
-511 CAC conflict.
-512 Not CAC.
-513 Not SAC.
-514 IFC abort.
-515 GPIB timed out.
-516 Invalid function number.
-517 TCT timeout.
-518 No listeners on bus.
-519 Driver problem.
-520 Bad slot number.
-521 No listen address.
-522 No talk address.
-523 IBUP Software configuration error.
-524 No utility function.
-550 EEPROM checksum error in %s: %s.
-551 EEPROM read error in %s: %s.
-552 EEPROM write error in %s: %s.
-553 %s returned unexpected error code %d.
-601 System software internal error; contact the factory.
-602 Module load error: %s.
-603 Module format error: %s.
-604 Module not found: %s.
-610 Could not start %s.
-611 Network error.
-612 Protocol error.
-620 Driver load error. Could not load %s.
-621 Driver configuration function not found. Driver is %s.
-640 %s serial number %s failed diagnostic test %d.
-641 %s serial number %s failed diagnostic test %d with a fatal fault.
-650 Request to open unknown channel type %08x.
-660 Invalid group ID %d.
-661 Invalid test ID %d.
-662 Ill-formed list.
-663 Executor is busy.
-664 Invalid unit ID %d.
-701 Error configuring serial port %s.
-702 Error opening serial port %s.
-703 Call kspcfg before using kspsnd or ksprcv.
Return to Section Topics
Section 8: Keithley User Library Tool (KULT)
8-217