Table of Contents
Advertisement
Model 4200-SCS Reference Manual
Customizing the view
Project Navigator display options
You can select whether or not KITE displays the Project Navigator, for example, when you desire a
wider KITE workspace. Toggle the display of the Project Navigator by clicking Project Navigator
in the View menu.
You can also specify the additional preferences for the Project Navigator through a pop-up menu,
that is displayed when you right-click the project plan name (the first component in the project
tree). See
Figure 6-419
Project Navigator pop-up menu
The pop-up menu selections are used as follows:
Messages display option
You can select whether or not KITE displays the Messages area at the bottom of the KITE window
(for example, when you temporarily desire more height in the KITE workspace). Toggle the display
of the Messages area by clicking Project Messages in the View menu.
Toolbar display options
You can select whether KITE displays the toolbars and toolbar buttons, and how it displays them,
from the Toolbars window. To open the Toolbars window, click in the View menu on Toolbars. See
Figure
4200-901-01 Rev. S / May 2017
Figure
6-419.
•
Allow Docking: When checked, allows an undocked Project Navigator to be docked in the
KITE window as follows:
- On either side of the KITE window, by moving it to the extreme right or extreme left.
- To the last docking position, by double-clicking its red Project Navigator window label
(when docked, you undock it by clicking the gripper bar at the same location).
•
Hide: Clicking Hide hides the Project Navigator. To unhide it, select Project Navigator in
the View menu.
•
Show Unique IDs (UID): When checked, the UIDs are displayed on the Project Navigator.
•
Make Project Read-Only: If checked, the project and its data can be viewed, but the
project cannot be modified or executed.
•
Make Project Run-Only: If checked, the project can be viewed and executed. Its data can
be viewed and saved, but the project cannot be modified. This setting allows operators to
run tests and project sequences while protecting test and project definitions from accidental
changes.
•
Float in Main Window: When checked, causes the following:
- Disables the Allow Docking selection.
- Prevents the Project Navigator from docking, regardless of where it is moved in the KITE
window.
6-420.
Return to
Section 6: Keithley Interactive Test Environment (KITE)
Section Topics
6-347
Advertisement
Chapters
Table of Contents
