Keithley 4200-SCS Reference Manual page 176

Section 6: Keithley Interactive Test Environment (KITE)
2. Configure the Define New Project window to meet the needs of your Project Plan, as
follows:
• Project Name edit box: Enter the Project Plan name, subject to the following rules.
• Location edit box: Specify the folder where the Project Plan is to be stored.
• Number of Sites combo box: Specify the number of sites to be evaluated by the Project
• Restore Default Location button: If you change the Project Plan location, click this
• Project Plan Initialization Steps: Click On if you plan to insert one or more initialization
• Project Plan Termination Steps: Click On if you plan to insert one or more termination
Figure 6-32
Initialization Steps, to evaluate five sites, and to conclude with Project Plan Termination
Steps. Note that place holders for initialization and termination steps have been added to a
mini-Project Navigator display at the left of the window, and that the Create Project caption
has changed to Create Project with Initialization and Termination Steps.
Figure 6-32
Define New Project window configured for the u_build Project Plan
6-50
• Any combination of alphanumerical characters, dashes, and underscores is allowed,
but no other special characters are allowed.
• No spaces are allowed.
• 260 characters, maximum, is allowed for the following combination: Project Plan
name plus all characters used in any directory path that includes the Project Plan
name.
Keithley Configuration Utility (KCON).
Plan, either by typing in the number of sites or by using the spin buttons.
button if you wish to restore the default folder as the Project Plan location.
UTMs at the start of the Project Plan.
UTMs at the end of the Project Plan.
shows the u_build Project Plan being configured to start with Project Plan
Return to Section Topics
Model 4200-SCS Reference Manual
4200-901-01 Rev. S / May 2017