Keithley 4200-SCS Reference Manual page 476

Section 6: Keithley Interactive Test Environment (KITE)
• Otherwise, if the system is adequately warmed up, the calibration proceeds as follows:
Figure 6-425
Progress display in the Auto Calibration dialog box and the message area
5. When the auto-calibration is complete, the Auto Calibration dialog box displays the
message shown in
Figure 6-426
Auto Calibration completion notification
6. In the Auto Calibration dialog box, click Close. The Auto Calibration dialog box closes.
6-350
• The auto calibration routine recalibrates the current and voltage offsets for all source
and measurement functions of all SMUs in the system.
• The Auto Calibration dialog box and the message area display the progress of the
auto calibration. For example, see
Figure 6-426.
Return to Section Topics
Model 4200-SCS Reference Manual
Figure 6-425.
4200-901-01 Rev. S / May 2017