Ki 4200/4210 Smu Properties And Connections Tabs - Keithley 4200-SCS Reference Manual

Model 4200-SCS Reference Manual
Table 7-4
Mode comparisons (continued)
Instrument self test
Custom A/D control
200 V, 1A capability
1.0 pA source/measure-range capability
(with preamp on SMU)
KXCI always starts in the selected mode, unless you change it using the 4200 (Normal) or 4145
Emulation button.
For additional details about the differences between the 4200 extended mode and 4145 emulation
mode, refer to
NOTE
User Library Settings tab
The Library Settings tab allows you to specify the active KITE / KULT user library directory. The
user library directory specified in KCON is used by KITE when user libraries are executed, and by
KULT when user libraries are modified.
To set the active user library directory, do the following:
1.
2.
Figure 7-15
User Library Settings tab
3.
4.

KI 4200/4210 SMU Properties and Connections tabs

Selection of a KI 4200 MPSMU in the Configuration Navigator causes the corresponding KI 4200
MPSMU Properties & Connections tab to be displayed in the Workspace. Additionally, selection
of a KI 4210 HPSMU in the Configuration Navigator causes the corresponding KI 4210 HPSMU
Properties & Connections tab to be displayed. A KI 4200 MPSMU Properties & Connections
tab is shown in
4200-901-01 Rev. S / May 2017
Characteristic
Keithley External Control Interface (KXCI)
In many cases, test programs developed for use with an Agilent 4145B run without
modification when they are used with a Model 4200-SCS running KXCI. Refer to
"Keithley External Control Interface
regarding KXCI.
Select KI 4200 SCS in the Configuration Navigator.
Select the User Library Settings tab in the Workspace. See
Click on the Browse button. The Browse for Folder window appears with the active user
library directory highlighted.
In the Browse for Folder window, change the active directory by selecting another
directory.
Figure 7-16.
Return to
4145 emulation mode
Not supported
Not supported
Supported
Supported
(KXCI)" in Section 9 for detailed information
Section Topics
Section 7: Keithley CONfiguration Utility (KCON)
Mode support
4200 extended mode
SMUs only
IT4 command options
in Section 9.
Figure 7-15.
7-19