Keithley 4200-SCS Reference Manual page 393

Model 4200-SCS Reference Manual
Adding/changing a border around the displayed test conditions
You can add or change a border around the displayed test conditions, as follows:
1.
Figure 6-331
Some of the available borders for displayed test conditions
2.
3.
Figure 6-332
Example 12-pixel Bevel border for displayed test conditions
4.
4200-901-01 Rev. S / May 2017
Under Border in the Graph tab Test Conditions window, click the scroll arrow on the Style
combo box. Several border style selections are available, some of which are shown in
Figure 6-331.
Select the desired border style (note that if the adjacent Width setting is 0 [default], the
Sample area does not yet display a border).
Also under Border in the Test Conditions window, in the Width text box, type a width for the
border. KITE accepts values between 0 and 20 pixels. The Sample area displays the
selected border around the values, in the same color as selected in the Background
combo box. See Figure
Click OK. The graph displays the test conditions with the selected border.
shows a bordered display of "vds-id" test conditions on the graph.
Return to Section Topics
Section 6: Keithley Interactive Test Environment (KITE)
6-332.
Figure 6-333
6-267