Setting Remote Control Mode (Gpib Versus Ethernet) - Keithley 4200-SCS Reference Manual

Model 4200-SCS Reference Manual

Setting remote control mode (GPIB versus Ethernet)

Setting remote control mode on the 4200 is done through KCON on the KXCI settings tab. By
default the 4200 is setup for GPIB remote control.
To select the remote control mode on the 4200-SCS, open KCON and click the KI 4200-SCS
system node (see
Figure 9-3
KI 4200 SCS properties tab
4200-901-01 Rev. S / May 2017
Figure 9-3).
Return to Section Topics
Section 9: Keithley External Control Interface (KXCI)
9-5